User Tools

Site Tools


satellite_module_s-001

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
satellite_module_s-001 [2011/05/30 03:26]
macegr
satellite_module_s-001 [2011/05/30 03:29] (current)
macegr
Line 1: Line 1:
 ====== Introduction ====== ====== Introduction ======
-{{http://​macetech.com/​store/​images/​medium/​satelliteS001_MED.jpg?&​nolink ​ }} The [[http://​macetech.com/​store/​index.php?​main_page=product_info&​cPath=1&​products_id=34|Satellite Module S-001]] is an 10 LED array of five-chip 100mA wide-angle (140 degree) red, green, and blue LEDs. The percieved output power of the red channel is a little less than the blue and green channels, so there are 4 red, 3 blue, and 3 green LEDs. Each LED supplies ~35,000 mcd over a 140 degree viewing angle. Combine with the OctoBar to create a string of super-bright clusters. These are as bright as 15 ShiftBrites on the blue and green, and 20 ShiftBrites on the red channel!+{{http://​macetech.com/​store/​images/​medium/​satelliteS001_MED.jpg?&​nolink ​ }} The [[http://​macetech.com/​store/​index.php?​main_page=product_info&​cPath=1&​products_id=34|Satellite Module S-001]] is an 10 LED array of five-chip 100mA wide-angle (140 degree) red, green, and blue LEDs. The percieved output power of the red channel is a little less than the blue and green channels, so there are 4 red, 3 blue, and 3 green LEDs. Each LED supplies ~35,000 mcd over a 140 degree viewing angle. Combine with the [[http://​macetech.com/​store/​index.php?​main_page=product_info&​cPath=1&​products_id=35|OctoBar]] to create a string of super-bright clusters. These are as bright as 15 ShiftBrites on the blue and green, and 20 ShiftBrites on the red channel!
  
 Each channel of the Satellite Module requires 9 to 10 VDC at 100mA. There are no current control resistors, you can add your own or use this with an OctoBar, which is preset to 100mA current per channel. Each channel of the Satellite Module requires 9 to 10 VDC at 100mA. There are no current control resistors, you can add your own or use this with an OctoBar, which is preset to 100mA current per channel.
/home/macetec/public_html/docs/data/pages/satellite_module_s-001.txt ยท Last modified: 2011/05/30 03:29 by macegr